Validator output for http://device.sprintpcs.com/Samsung/SPH-A680/XC15.rdf

RDF parser warning:{W119} A processing instruction is in RDF content. No processing was done. 
RDF parser warning:{W102} unqualified use of rdf:ID is deprecated.
RDF parser warning:{W102} unqualified use of rdf:ID is deprecated.
RDF parser warning:{W102} unqualified use of rdf:resource is deprecated.
RDF parser warning:{W102} unqualified use of rdf:ID is deprecated.
RDF parser warning:{W102} unqualified use of rdf:resource is deprecated.
RDF parser warning:{W102} unqualified use of rdf:ID is deprecated.
RDF parser warning:{W102} unqualified use of rdf:resource is deprecated.
RDF parser warning:{W102} unqualified use of rdf:ID is deprecated.
RDF parser warning:{W102} unqualified use of rdf:resource is deprecated.
RDF parser warning:{W102} unqualified use of rdf:ID is deprecated.
RDF parser warning:{W102} unqualified use of rdf:resource is deprecated.
RDF parser warning:{W102} unqualified use of rdf:ID is deprecated.
RDF parser warning:{W102} unqualified use of rdf:resource is deprecated.
RDF parser warning:{W102} unqualified use of rdf:ID is deprecated.
RDF parser warning:{W102} unqualified use of rdf:resource is deprecated.
The profile uses an unknown namespace: [http://device.sprintpcs.com/uaprof/]
The profile uses an unknown namespace: [http://device.sprintpcs.com/namespace/]
Error [C: http://www.wapforum.org/profiles/UAPROF/ccppschema-20010430#BrowserUA, A: http://www.wapforum.org/profiles/UAPROF/ccppschema-20010430#XhtmlModules] is not a container.
PROFILE IS NOT VALID

Problems with this report?

Original profile

<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="/uaprof.xsl"?>
<!--
*********************************************************************
*	Sprint PCS 3G handset UA Prof template
*
*	Version:		1.4
*	Created:		1/3/02
*	Author:			Scott Papineau (spapin01@sprintspectrum.com)
*	Organization:	Subscriber Equipment Business Unit (SEBU)
*	Modified: 		10/2/05
*
*	Copyright 2003 Sprint PCS
*
*	Note
*		Elements that are not required by Sprint PCS have been omitted
*		from this template.  Vendors may add elements that are defined
*		in the UAPROF specification if additional features are supported
*		by their device
*
*	Revision History
*		0.1		Initial Release
*
*		1.2		Updated for Multimedia (J Gilborne)
*
*		1.3		Updated for FOTA Components (K Hunter) 10/21
*				Updated for OTA Diagnostics Components  (K Hunter) 10/21
*				Updated Multimedia Component to include MultimediaEncoderDisplaySize
*				Updated WapDeviceClass with documentation
*		1.4		Updated to work with MAG6 and follow standards (D Durig)
*
*	Known issues
*		
*		Push characteristics are not defined yet
*		
*		
*********************************************************************
-->	 

<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:prf="http://www.wapforum.org/profiles/UAPROF/ccppschema-20010430#" xmlns:xpcs="http://device.sprintpcs.com/namespace/xpcs" xmlns="http://www.w3.org/1999/02/22-rdf-syntax-ns#">

<rdf:Description ID="MyDeviceProfile">

<!--********************** Hardware Platform Description ***************************************-->
<prf:component>
	<rdf:Description ID="HardwarePlatform">
		<rdf:type resource="http://www.wapforum.org/profiles/UAPROF/ccppschema-20010430#HardwarePlatform"/>

<!-- ******** Vendor/model *******-->	


<!-- Enter the vendor name here.  This must match the vendor name in the EDF -->		
		<prf:Vendor>
			SAMSUNG
		</prf:Vendor>
	
<!-- Enter the device model name here.  This must match the model name in the EDF -->		
		<prf:Model>
			SPH-A680
		</prf:Model>
		
<!-- Change if different -->
		<prf:CPU>
			ARM7
		</prf:CPU>
		
		
<!--****** Display ******-->
		
<!-- Enter screen size in pixels here - width x height -->
		<prf:ScreenSize>
			128x160
		</prf:ScreenSize>
		
<!-- "Yes" if device supports color -->	
		<prf:ColorCapable>
			Yes
		</prf:ColorCapable>
		
<!-- Enter the color or grayscale depth here -->
		<prf:BitsPerPixel>
			16
		</prf:BitsPerPixel>
		
<!-- Change if not 1:1 -->
		<prf:PixelAspectRatio>
			1x1
		</prf:PixelAspectRatio>
		
<!-- This should always be "Yes" -->
		<prf:ImageCapable>
			Yes
		</prf:ImageCapable>

<!-- Enter the screen size in characters here.  Use the default font. -->		
		<prf:ScreenSizeChar>
			16x9
		</prf:ScreenSizeChar>

<!-- Change the to "No" only if the default font on the device is not proportional -->
		<prf:StandardFontProportional>
			Yes
		</prf:StandardFontProportional>


<!-- List the supported output character sets here. -->
		<prf:OutputCharSet>
			<rdf:Bag>
				<rdf:li>ISO-8859-1</rdf:li>
				<rdf:li>US-ASCII</rdf:li>
				<rdf:li>UTF-8</rdf:li>
				<rdf:li>UTF-16</rdf:li>
			</rdf:Bag>
		</prf:OutputCharSet>
		
		

<!-- ******** Input capabilities ******-->		
<!-- List the supported Input character sets here -->
		<prf:InputCharSet>
			<rdf:Bag>
				<rdf:li>ISO-8859-1</rdf:li>
				<rdf:li>US-ASCII</rdf:li>
				<rdf:li>UTF-8</rdf:li>
			</rdf:Bag>
		</prf:InputCharSet>
		
<!-- This should always be "Yes" -->
		<prf:TextInputCapable>
			Yes
		</prf:TextInputCapable>
		
<!-- This value should only be changed if the device does not use a standard DTMF keypad -->
		<prf:Keyboard>
			PhoneKeypad
		</prf:Keyboard>

<!-- Enter the number of softkeys supported by the device -->
		<prf:NumberOfSoftKeys>
			2
		</prf:NumberOfSoftKeys>
		

<!-- ********* Audio **********-->	

<!-- This should always be "Yes" -->
		<prf:SoundOutputCapable>
			Yes
		</prf:SoundOutputCapable>


<!-- This should be "Yes" for all voice capable devices -->		
		<prf:VoiceInputCapable>
			Yes
		</prf:VoiceInputCapable>

<!--******************************-->		
	</rdf:Description>
</prf:component>



<!--********************** Software Platform Description ***************************************-->
<prf:component>
	<rdf:Description ID="SoftwarePlatform">
	<rdf:type resource="http://www.wapforum.org/profiles/UAPROF/ccppschema-20010430#SoftwarePlatform"/>

<!-- ***** Basic ******-->

<!-- Should be "Yes" for all Java capable devices -->
	<prf:AcceptDownloadableSoftware>
		Yes
	</prf:AcceptDownloadableSoftware>
	
<!-- Use this for J2ME app support -->
	<prf:DownloadableSoftwareSupport>
	<rdf:Bag><rdf:li>application/java-archive</rdf:li></rdf:Bag>
	</prf:DownloadableSoftwareSupport>
	
<!-- Enter the software version number here.  This must match the version reported via IOTA-->
	<prf:SoftwareNumber>
	    XC15	
	</prf:SoftwareNumber>

<!-- Should not change if using Qualcomm software-->	
	<prf:OSName>
		Rex
	</prf:OSName>

<!-- Should not change if using Qualcomm software-->	
	<prf:OSVendor>
		QUALCOMM
	</prf:OSVendor>
	
<!-- Fill in version of DMSS Software base -->
	<prf:OSVersion>
		DMSS6050/3.1.2
	</prf:OSVersion>
	
	
<!-- ********** Java ***********-->

<!-- Should be yes for all Java capable products -->
	<prf:JavaEnabled>
		Yes
	</prf:JavaEnabled>
	
<!-- Indicate MIDP + Sprint Extension profile support -->
	<prf:JavaPlatform>
		<rdf:Bag>
			<rdf:li>MIDP-1.0.3</rdf:li>
			<rdf:li>SPRINTPCS-1.3</rdf:li>
		</rdf:Bag>
	</prf:JavaPlatform>

<!-- Indicate the VM vendor/version here -->	
	<prf:JVMVersion>
	<rdf:Bag><rdf:li>	SunKVM/1.0.3</rdf:li></rdf:Bag>
	</prf:JVMVersion>

<!-- ********* CCPP accept **********-->

<!-- List all accepted MIME types here -->
	<prf:CcppAccept>
		<rdf:Bag>
			<!-- Markup languages -->
			<rdf:li>text/vnd.wap.wml</rdf:li>
			<rdf:li>application/vnd.wap.wmlc</rdf:li>
			<rdf:li>application/xhtml+xml</rdf:li>
			<rdf:li>application/vnd.wap.wmlc</rdf:li>
			<rdf:li>application/vnd.wap.wbxml</rdf:li>
						
			<!-- Images -->
            <rdf:li>image/png; q=0.9</rdf:li>
            <rdf:li>image/jpeg; q=0.5</rdf:li>
            <rdf:li>image/vnd.wap.wbmp; q=0.2</rdf:li>
						
			<!-- Audio / Multimedia  -->
			<rdf:li>audio/midi</rdf:li>
			<rdf:li>audio/vnd.qcelp</rdf:li>
			<rdf:li>application/x-pmd</rdf:li>
			<rdf:li>video/x-ls-mjpg</rdf:li>
			
			<!-- Other: add other supported types here -->
			<rdf:li>text/vnd.sun.j2me.app-descriptor</rdf:li>
			<rdf:li>text/x-pcs-gcd</rdf:li>
			<rdf:li>text/css</rdf:li>
            <rdf:li>application/java</rdf:li>
            <rdf:li>application/java-archive</rdf:li>
		</rdf:Bag>
	
	</prf:CcppAccept>
	
<!-- List all accepted character sets here -->
	
	<prf:CcppAccept-Charset>
		<rdf:Bag>
			<rdf:li>ISO-8859-1</rdf:li>
			<rdf:li>US-ASCII</rdf:li>
			<rdf:li>UTF-8</rdf:li>
			<rdf:li>UTF-16</rdf:li>
			<!-- Enter other items... -->
		</rdf:Bag>
	
	</prf:CcppAccept-Charset>
	
<!-- List all accepted languages here in order of preference -->
	
	<prf:CcppAccept-Language>
		<rdf:Seq>
			<rdf:li>en-us</rdf:li>
			<!-- Enter other items... -->
		</rdf:Seq>
	</prf:CcppAccept-Language>
	
<!-- List all accepted transfer encodings here -->
	
	<prf:CcppAccept-Encoding>
		<rdf:Bag>
			<!-- Enter items... -->
		</rdf:Bag>
	</prf:CcppAccept-Encoding>
	
<!-- ******** Input Encoders ******-->
<!-- Don't know if we need this or not... 
	<prf:AudioInputEncoder>
	
	</prf:AudioInputEncoder>
	

 -->
<!--******************************-->	
	</rdf:Description>
</prf:component>

<!--********************** Network Characteristics Description ***************************************-->

	<prf:component>
	<rdf:Description ID="NetworkCharacteristics">
	<rdf:type resource="http://www.wapforum.org/profiles/UAPROF/ccppschema-20010430#NetworkCharacteristics"/>
	
<!-- Indicate support for SSL 3.0 and TLS 1.0 -->
	<prf:SecuritySupport>
		<rdf:Bag>
			<rdf:li>SSL-3.0</rdf:li>
			<rdf:li>TLS-1.0</rdf:li>
		</rdf:Bag>
	</prf:SecuritySupport>
	
<!-- Indicate support for IS-2000 release 0 packet data bearer -->
<!-- May add more detail here in a later rev. -->
	<prf:SupportedBearers>
		<rdf:Bag>
			<rdf:li>IPv4</rdf:li>
		</rdf:Bag>
	</prf:SupportedBearers>
		
	</rdf:Description>
</prf:component>

<!--********************** Browser UA Description ***************************************-->

<prf:component>
	<rdf:Description ID="BrowserUA">
	<rdf:type resource="http://www.wapforum.org/profiles/UAPROF/ccppschema-20010430#BrowserUA"/>
	
<!-- ********* Browser Identification ********** -->

<!-- Enter the browser vendor/product name here -->
	<prf:BrowserName>
		AU System
	</prf:BrowserName>
	
<!-- Enter the browser version here -->
	<prf:BrowserVersion>
		MIC 1.1.4
	</prf:BrowserVersion>
	
<!-- ********** Capabilities *********** -->
	
<!-- Frames are not supported -->
	<prf:FramesCapable>
		No
	</prf:FramesCapable>
	
<!-- Basic tables are supported in xhtml-basic -->
	<prf:TablesCapable>
		Yes
	</prf:TablesCapable>
	
<!-- Frames are not supported -->
	<prf:PreferenceForFrames>
		No
	</prf:PreferenceForFrames>
	
<!-- *********** Applet / Script support is not required ********** -->	
	<prf:DownloadableBrowserApps>
	<rdf:Bag><rdf:li>	No</rdf:li></rdf:Bag>
	</prf:DownloadableBrowserApps>
	
	<prf:JavaAppletEnabled>
		No
	</prf:JavaAppletEnabled>
	
	<prf:JavaScriptEnabled>
		No
	</prf:JavaScriptEnabled>
	
	
<!-- ************* XHTML support - indicate XHTML-Basic 1.0 ************ -->
	<prf:XhtmlVersion>
		XHTML-Basic/1.0
	</prf:XhtmlVersion>
	
<!-- May need to add additional modules here -->
	<prf:XhtmlModules>
	
	</prf:XhtmlModules>

<!--******************************-->
	
	</rdf:Description>
</prf:component>

<!--********************** WAP Characteristics Description ***************************************-->

<prf:component>
	<rdf:Description ID="WapCharacteristics">
	<rdf:type resource="http://www.wapforum.org/profiles/UAPROF/ccppschema-20010430#WapCharacteristics"/>

<!--******** General ***********-->
				<!-- WAP Device Class defined in http://www1.wapforum.org/tech/documents/PROP-ClassConform-20000211.pdf -->
	<prf:WapDeviceClass>A</prf:WapDeviceClass>
	
	<prf:WapVersion>
		2.0
	</prf:WapVersion>

<!--*********** WML ************-->

<!-- If full wml 2.0 is supported, it should be added here -->	
	<prf:WmlVersion>
		<rdf:Bag>
			<rdf:li>1.1</rdf:li>
			<rdf:li>1.2</rdf:li>
		</rdf:Bag>
	</prf:WmlVersion>

<!-- Enter the maximum deck size for wml -->
	<prf:WmlDeckSize>
		131072
	</prf:WmlDeckSize>

<!--******************************-->
	</rdf:Description>
</prf:component>

<!--********************** Push Characteristics Description ***************************************-->
<!-- Note: This entire section is TBD in this revision -->

<prf:component>
	<rdf:Description ID="PushCharacteristics">
	<rdf:type resource="http://www.wapforum.org/profiles/UAPROF/ccppschema-20010430#PushCharacteristics"/>


 <!--
	<prf:Push-Accept>
		<rdf:Bag>
		</rdf:Bag>
	</prf:Push-Accept>

	<prf:Push-Accept-Encoding>
		<rdf:Bag>
			
		</rdf:Bag>
	</prf:Push-Accept-Encoding>


 -->
	<prf:Push-Accept-AppID>
		<rdf:Bag>
			<rdf:li>x-wap-application:wml.ua</rdf:li>
			<rdf:li>*</rdf:li>
		</rdf:Bag>
	</prf:Push-Accept-AppID>

	<prf:Push-MsgSize>
		1400
	</prf:Push-MsgSize>
	
<!-- ********************************-->	
	</rdf:Description>
</prf:component>

<!-- ****************** Sprint UA Prof Extensions ******************************-->
<prf:component>
	<rdf:Description ID="SprintExtensions">
	<rdf:type resource="http://device.sprintpcs.com/uaprof/sprint-uaprof-extensions.xml"/>
	
	<!-- MultimediaPlayback support -->
	<xpcs:MultimediaPlaybackSupport>
		<!-- example -->
		No
	</xpcs:MultimediaPlaybackSupport>
	
	<!-- Multimedia Streaming Support -->
	<xpcs:MultimediaStreamingSupport>
		<!-- example -->
		No
	</xpcs:MultimediaStreamingSupport>
	
	<!-- Multimedia Encoding Support -->
	<xpcs:MultimediaEncodingSupport>
		<!-- example -->
		No
	</xpcs:MultimediaEncodingSupport>
	
	<!-- Type and version of MM player supported -->
	<xpcs:MultimediaPlayer>
		<!-- example -->
				
	</xpcs:MultimediaPlayer>
	
	<!-- Type and version of MM encoder supported -->
	<xpcs:MultimediaEncoder>
		<!-- example -->
	</xpcs:MultimediaEncoder>
				<!-- Multimedia Encoder Supported Display Size(s) -->
				<xpcs:MultimediaEncoderDisplaySize>
					<!-- example -->
					<rdf:Bag>
						<rdf:li>
	
						</rdf:li>
						<rdf:li>

						</rdf:li>
						<!-- Enter other items... -->
					</rdf:Bag>
				</xpcs:MultimediaEncoderDisplaySize>
	<!-- File Format the decoder supports -->
	<xpcs:MultimediaFileFormatForDecoder>
		<rdf:Bag>
						<rdf:li>  </rdf:li>
						<rdf:li>  </rdf:li>
			<!-- Enter other items... -->
		</rdf:Bag>
	</xpcs:MultimediaFileFormatForDecoder>
	
	<!-- File Format the encoder supports -->
	<xpcs:MultimediaFileFormatForEncoder>
		<rdf:Bag>
						<rdf:li>  </rdf:li>
						<rdf:li>  </rdf:li>
			<!-- Enter other items... -->
		</rdf:Bag>
	</xpcs:MultimediaFileFormatForEncoder>
	
	<!-- Display size the Multimedia player supports -->
	<xpcs:MultimediaVideoDisplaySize>
		<rdf:Bag>		
			<rdf:li>
						
			</rdf:li>
			<rdf:li>
						
			</rdf:li>
						<!-- Enter other items... -->
		</rdf:Bag>
	</xpcs:MultimediaVideoDisplaySize>
	
	<!-- Maximum frame rate the device supports when playing local files -->
	<xpcs:MultimediaMaximumFrameRateForPlayback>
		<!-- example -->
	</xpcs:MultimediaMaximumFrameRateForPlayback>
	
	<!-- Maximum frame rate the device supports when streaming content -->
	<xpcs:MultimediaMaximumFrameRateForStreaming>
		<!-- example -->
	</xpcs:MultimediaMaximumFrameRateForStreaming>
	
	<!-- Maximum frame rate the device supports when encoding content -->
	<xpcs:MultimediaMaximumFrameRateForEncoding>
		<!-- example -->
	</xpcs:MultimediaMaximumFrameRateForEncoding>
	
	<!-- Maximum bit rate the Multimedia player supports when playing local files -->
	<xpcs:MultimediaMaximumBitRateForPlayback>
		<!-- example -->
	</xpcs:MultimediaMaximumBitRateForPlayback>
	
	<!-- Maximum bit rate the device supports when streaming content -->
	<xpcs:MultimediaMaximumBitRateForStreaming>
		<!-- example -->
	</xpcs:MultimediaMaximumBitRateForStreaming>
	
	<!-- Maximum bit rate the device supports when encoding content -->
	<xpcs:MultimediaMaximumBitRateForEncoding>
		<!-- example -->
	</xpcs:MultimediaMaximumBitRateForEncoding>

	
	
	<!-- List all supported video codecs for decoding here -->
	<xpcs:VideoCodecsForDecoding>
		<rdf:Bag>
						<rdf:li>  </rdf:li>
						<rdf:li>  </rdf:li>
			<!-- Enter other items... -->
		</rdf:Bag>
	</xpcs:VideoCodecsForDecoding>
	
	<!-- List all supported video codecs for encoding here -->
	<xpcs:VideoCodecsForEncoding>
		<rdf:Bag>
						<rdf:li>   </rdf:li>
						<rdf:li>   </rdf:li>
			<!-- Enter other items... -->
		</rdf:Bag>
	</xpcs:VideoCodecsForEncoding>

	<!-- List all supported audio codecs here -->
	<xpcs:AudioCodecsForDecoding>
		<rdf:Bag>
						<rdf:li>  </rdf:li>
						<rdf:li>  </rdf:li>
			<!-- Enter other items... -->
		</rdf:Bag>
	</xpcs:AudioCodecsForDecoding>
	
	<!-- List all supported audio codecs here -->
	<xpcs:AudioCodecsForEncoding>
		<rdf:Bag>
						<rdf:li>  </rdf:li>
						<rdf:li>  </rdf:li>
			<!-- Enter other items... -->
		</rdf:Bag>
	</xpcs:AudioCodecsForEncoding>
	
	<!-- MCD version -->
	<xpcs:SprintMcdVersion>
				 
	</xpcs:SprintMcdVersion>
	
	<!-- PictureMailSupport -->
	<xpcs:PictureMailSupport>
		<!-- example -->
		Yes
	</xpcs:PictureMailSupport>
	
	<!-- VideoMailSupport -->
	<xpcs:VideoMailSupport>
		<!-- example -->
		Yes
	</xpcs:VideoMailSupport>
	
	<xpcs:MobileOriginatedSmsSupport>
		<!-- example -->
		Yes
	</xpcs:MobileOriginatedSmsSupport>

<!-- ***************  FOTA Components  *****************-->
	<xpcs:FotaProtocolVersion>
		<!-- example -->
			1.1 
		</xpcs:FotaProtocolVersion>
		<xpcs:FotaClientVersion>
			<!-- example -->
			1.2.2
		</xpcs:FotaClientVersion>
		<xpcs:FotaClientVendor>
			<!-- example -->
	                              Samsung
		</xpcs:FotaClientVendor>

<!-- ***************  OTA Diagnostics Components  *****************-->
		<xpcs:DiagnosticsProtocolVersion>
			<!-- example -->
					
		</xpcs:DiagnosticsProtocolVersion>
		<xpcs:DiagnosticsClientVersion>
			<!-- example -->
					
		</xpcs:DiagnosticsClientVersion>
		<xpcs:DiagnosticsClientVendor>
			<!-- example -->
					
		</xpcs:DiagnosticsClientVendor>
	</rdf:Description>
</prf:component>

</rdf:Description>
</rdf:RDF>